Just wondering, those seem to be right around the golden numbers i've been aiming for my shee. Just what would i need to produce those kinds of numbers? Thanks for the help.

 

with some sort of inframe drag pipes and port work you could probably get there on stock carbs.

 

4mm stroked crank, 18cc head, port work, reeds, cpi pipes, and carbs should cover it nicely. This is my brothers first setup and it put out more than 60hp at the rear wheels. According to a dyno.

 

I would say this would be pretty close.

 

thanks for the info, another question though. Could i still get there with this setup and obviously more additions, basically just wondering is this a good start. stock bore wiesco's, t-5's, dual K&N clamp ons, and vito 4 degree key. One other quick question, vito's power pistons, are they worth the investment powerwise over plain ol'wiescos? Thanks again.

 

Dont bother with the pistons if your gonna port it.

 

A decent amount of cash.

 

You can get there no problem with portwork on stock carbs and the pipes you have.Stick with the Wiseco stock bore and try to invest in a timing plate.I've seen too many keys shear off.The T-5's make good power.They are great for what you're tryin' to do.PM me for any other questions.I'll help ya any way I can.

 

hiw many hp would a 7mm stroker get ya?

 

ive seen well built 7mm run that i wouldnt be scared to say are in the 80-95 hp area!