raptor wont start?
#14
#16
#17
raptor wont start?
hey the cable for the choke moves i watched for that. and i tryied giving it gas instead of useing choke thisng the cable snapped but that didnt work.
ps. is it tru that you can bend a rod by holding the starting down and it not starting causeing the motor to flood with gas and cause pressure to bend a rod?
ps. is it tru that you can bend a rod by holding the starting down and it not starting causeing the motor to flood with gas and cause pressure to bend a rod?
#18
raptor wont start?
This is likley not the problem but have the valves been adjusted latley?? My 01 Raptor got to where is would not start and i had checked and tried everything and the mechanic at the yamaha shop told me to adjust the valves, so i did and it cranked right up and runs fine. Had a 660 grizzly do the exact same thing.
#20
raptor wont start?
Here's another shot at your problem. Check your fuses under the seat, my step-brothers did the same thing and the problem was with the fuse. Also check for a short from the fuse block and go along the frame. I have seen a wire get rubbed to where it just has a little contact.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)