Yamaha Discussions about Yamaha ATVs.

warrior dont crank

Old Nov 1, 2004 | 09:08 AM
  #1  
titty's Avatar
Thread Starter
|
Weekend Warrior
Joined: Oct 2004
Posts: 4
Likes: 0
Default warrior dont crank

87 warrior, battery is charged, i go to start it and the starting circuit cut off relay clicks and thats all i get wats the problem
 
Reply
Old Nov 1, 2004 | 02:40 PM
  #2  
hondabuster's Avatar
Elite Pro Rider
Joined: Dec 2003
Posts: 5,599
Likes: 0
Default warrior dont crank

The voltage is dropping too far. Check for corrosion on the battery contacts. If everything is clean and tight, then have the battery, load tested. Any good auto parts store will do that for free. If you have a voltmeter, hook it up to the battery terminals, before starting, and watch the voltage while cranking. It shouldnt drop below 10 volts while cranking.
 
Reply
Old Nov 1, 2004 | 03:38 PM
  #3  
Bosch's Avatar
Pro Rider
Joined: Apr 2004
Posts: 268
Likes: 0
Default warrior dont crank

Make sure your ground cable is clean & tight on both ends.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jackg17
Ask the Editor
7
Jul 16, 2018 04:01 AM
Scooter's Shop
Polaris
9
Oct 9, 2015 02:09 PM
Barnsnelbon
Yamaha
1
Sep 27, 2015 03:07 AM
Jackg17
General Chat
0
Sep 26, 2015 09:30 PM
Bernhard
Yamaha
1
Sep 25, 2015 12:45 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:00 AM.