Blaster Problems
#41
Blaster Problems
Ok I read the problem, and take off the carb and just clean it totally. Take off the bowl and make sure everything moves down there then blow out all of the little holes(Jets). I would call the dealership and ask them if they jetted it because if not, you need to and that is probably your problem. Like the other guys said, also look for gas pluggage. Then take out the reeds, They go into the head after the carb, into the intake port. Make sure they are totally sealed for one, but make sure that they are hard, if they got soft thats no good either. If it wasnt jetted, (meaning that the pins in the carb that block off gas and also let in the right amount of gas), Then youre not getting enough gas, and thats bad because on a 2 stroke that means oil also.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky2050
Buying an ATV
10
04-09-2020 11:19 AM
joeyupton
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
07-14-2015 11:51 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)