Ok I think I have narrowed down what I want to buy for my raptor, HMF full exhaust, and the pro design intake with K&N, lid on. I don't know if I should buy the full DJ kit or just buy jets, because from what I searched I guess its ok to use the stock needles. I am around 600 to 700 feet above sea level. I was thinking about trying 155/160 for the main jets, what do you guys think of that, needle on 3rd clip and three turns out on the AF screw. I have searched and nothing really answers my questions. Are my main jets too rich, should I go with 150/155 and do you think I will need a new pilot?

Thanks,

MIke.

 

Did you buy the exhaust??>


Sparks will be faster.. extremely faster

Get the kit you might want to switch jets somtime??(if you go away or..)

 

No I haven't bought anything yet but this is kinda a plan.

Get the kit you might want to switch jets somtime??(if you go away or..)

What do you mean by that?
Is there anything in the kit that I need besides the jets for my purpose?

 

get the kit, it has better springs and the needles have a better taper to allow more fuel flow!!

 

other typs of jets.. you can have 150- 145-

what i mean is if you travel to a different sea level then you would want to switch because it wont run that good. I usually take a trip for a couple weeks to the pocanoes in PA its higher elivation so i change my jets everytime before i go!!

In my opinion..(i dont want to lessen your hopes) look at the Sparks pipe. Its real loud and the speed you get with it is rediculously fast.

Store to buy sparks!!
Sparks website!!!

 

I will consider it, does it have a spark arrestor? Becuase I need one where I ride. What would you recommend for the jettings if I got that pipe and the pro design intake?