Yea I do it all, even alot of the engine stuff I will do myself. I've totally rebuilt it before, starting with the bottom end and worked my way up. I didn't do the paint work, I had it sandblasted and then painted professionally to make sure it turned out good.

 

LOOK'S SICK MAN!! I like your frame color a little better than criminal's. Wanted to ask you are you having problem's getting on the other site? For some reason i can't get on it..(hope i wasn't banned[img]i/expressions/face-icon-small-shocked.gif[/img]

 

Ok guys there are some new pics up in my page of the new intake track from Hollywood Dirt. It's based off a CR250 design, check it out. This is the first one done and is basically a test.
Because of the radical design this engine is basically going to be a big air pump. Carburation and exhaust is going to play a huge role in how it peforms. Its going to be fed through the riffiled PWK 33mm carb, which is now a 35mm. There is a pic of that in the page also. The airbox has been cut from the frame and replaced with a aftermarket airbox from CFM peformace which should provide good air flow.
A CPI big bore pipe will soon be replacing the FMF system.

 

Did you buy the carb like that? from the pic it looks like it has a spiral design? that should help a bit too. awesome looking blaster.

 

No it didn't come like that. I bought it new as a 33mm carb. After the spiral effect has been carved into it, it becomes close to a 35mm. It basically just keeps the air flowing in a straight line, similar to how the spiral inside a gun works.

 

so how much did u say it cost to do all that to ur quad again?? alot?

 

Looks great shav0!!! I cant wait to get my PD3!!![img]i/expressions/face-icon-small-cool.gif[/img]

 

Actually you'll be suprised. Hollywood Dirt's products are really light on the wallet also.