Blaster wont shift up from 2nd!!!!
#11
#12
#13
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
how much do you guys think i should pay for these bottom end blaster parts? Bottom end parts galore
#14
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Tranny rebuild was the easiest part of my entire rip down of my blaster. I changed the main axle and took off every gear and replaced all circlips and everything, drum, forks, star. Its a very simple task. I had no manuel or no help, just the want to ride a fixed quad.
#15
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
cant help you on your blaster problem but i can help with him go over to his house get on his atv and crank it up an just peg the gas wide- a s s -open till it comes all fckn apart and say its aight *** it was jus a piece of SHIAYT BIACHHH. AND just walk away all calm.[img]i/expressions/face-icon-small-happy.gif[/img] IF someone did that to MY atv i would TEAR there- a s s -out of frame.[img]i/expressions/face-icon-small-mad.gif[/img]
#17
#19