raptor banshee
#13
raptor banshee
Originally posted by: raptorRACER16
what does a raptor need to beat a banshee with a fmf pipe system, K&n, and it is bored out
with a 692 kit and pipe and filter i think the raptor could take it what do you guys think
what does a raptor need to beat a banshee with a fmf pipe system, K&n, and it is bored out
with a 692 kit and pipe and filter i think the raptor could take it what do you guys think
So is this a new sleeve or is the engine builder going to unrealistic tolerances on the cylinder walls and creating a time bomb?
And unless you install a higher compression piston and new camshaft you arent going to see more than a couple hp out of a big bore. Basically its useless.
You need to do some research, and tell us where you heard about this "692" raptor kit...
#14
#15
raptor banshee
Get a Web Cam 696/697 Grind Cam, Get a Stock Bore 11:1 Weisco Piston, and Kibblewhite valve springs, you need all 3 to make good power reliably, you need a piston when doing a cam to get most performance, the above cam will increase power all over the board, and still run on premium. good for a handfull of horses.
#16
raptor banshee
why would you even bother boring it, you could take banshees on a stock bore with some other mods. alot of people dont know it but an extra 32 or somthing like that cc's dont make a huge difference. the power comes mainly from the parts used with the bored out engine.
Roostking....
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Alex Rodak
Introduce Yourself
0
09-11-2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)