hi all my raptor has a big gun slip - on with k&n filter with lid on and 145 150 mians 27.5 piolets 2 and 2.5 turns on the mixturer screws and when i ride it when i let off the gas it just pops and wants to die out and i cant get it to idel at all can u guys help me out plz?

 

your piolits are to big, go back to stock piolits and go 3 turns out, if you run with no lid then go to 25, put aslong as you have lid on you need stock piolits.

 

i was thinking about going to 150 155 mains will that help and u think i should put the stock piolets in and the 27.5 with no lid right

 

Mains*** only control Full throttle, when u let off the gas its piolits, if u keep no lid go back to stock piolits, if you take lid off go to 25 piolits, 27.5 are way to big.

 

ok so 22.5 are stock right what do you think about the 150 155 mains idea?

 

well, does it run good when held at full throttle? and then just bogs when let off right?

 

basicly but all the jetting recamends 150 155

 

thanks for the help btw

 

150 155 mains? anyone

 

bump