Yamaha Discussions about Yamaha ATVs.

YFZ 450 Problem,Help

Thread Tools
 
Search this Thread
 
  #1  
Old 04-24-2005 | 08:24 PM
rc3's Avatar
rc3
Thread Starter
|
Pro Rider
Joined: Mar 2002
Posts: 629
Likes: 0
Default YFZ 450 Problem,Help

I went riding today, and everything was going great except one thing. Whenever I would get into 5th gear it would kind of cut out, I though maybe it was hitting the rev limiter, so I did some late shifts in 2nd, & 3rd, & 4th, & I never had a problem it revved out and ran hard anytime I would shift to 5th the thing would start cutting out, and I know that I was not near the rev limiter because I was revving higher in all the other gears. I could be full throttle 4th and have no problem, hit 5th full throttle had problems, so I went to some hill climbs, 2nd & 3rd high revs, and full throttle it ran hard and strong, hit 5th gear on the flats and it would cut out, any suggestions would be great
 
  #2  
Old 04-24-2005 | 09:39 PM
Bigdaddy660R's Avatar
Extreme Pro Rider
I'm Short and Very Ugly.....
Joined: Nov 2003
Posts: 3,925
Likes: 0
From: HillBillyVilla, WA.
Default YFZ 450 Problem,Help

WOW that is a strange problem......Maybe some kind of ELECTRICAL/SPARK problem....but why only in 5th gear.
Did it feel as if the fuel bowl was runnin dry enough to sputter a little?????.....Ya this is a strange 1 to me...GOOD LUCK let us know how it turns out [img]i/expressions/face-icon-small-smile.gif[/img]
 
  #3  
Old 04-25-2005 | 02:38 AM
rc3's Avatar
rc3
Thread Starter
|
Pro Rider
Joined: Mar 2002
Posts: 629
Likes: 0
Default YFZ 450 Problem,Help

I will if I ever figure it out, because i did tests in everyother gear, and it runs hard top to bottom until you hit 5th gear! Oh well I guess maybe it wont happen again!

 
  #4  
Old 04-25-2005 | 02:43 AM
hondabuster's Avatar
Elite Pro Rider
Joined: Dec 2003
Posts: 5,599
Likes: 0
Default YFZ 450 Problem,Help

Im thinking it may be lean, on the main jet. Because of the gearing, 5th is almost 1:1, and requires more power than 4th at wide open. Try pulling on the choke,when its acting up..if it gets better, then the main circuit is too lean.
 
  #5  
Old 04-25-2005 | 02:49 AM
rc3's Avatar
rc3
Thread Starter
|
Pro Rider
Joined: Mar 2002
Posts: 629
Likes: 0
Default YFZ 450 Problem,Help

I will try that, but i have been running this jetting for over a year now with a full Yoshi TRS Exhaust, I have since then installed a quiet core, and still running a 48 pilot, 4th clip on YZ needle, and a 170 main. but I will definately try that because that is the feeling i got, but i thought since it never did it in any other gear, it wasnt jetting,. So if it was jetting would you reccomend a bigger main.
 
  #6  
Old 04-25-2005 | 03:02 AM
hondabuster's Avatar
Elite Pro Rider
Joined: Dec 2003
Posts: 5,599
Likes: 0
Default YFZ 450 Problem,Help

If pulling the choke on, makes it smooth out..then its lean, and I think one up on the main would be enough.
Have you changed the spark plug, lately?
 
  #7  
Old 04-25-2005 | 10:21 AM
rc3's Avatar
rc3
Thread Starter
|
Pro Rider
Joined: Mar 2002
Posts: 629
Likes: 0
Default YFZ 450 Problem,Help

yeah, it has a new spark plug in it I will try the choke thing and see if that takes care of my problem, thanks,

 
  #8  
Old 04-25-2005 | 09:16 PM
rc3's Avatar
rc3
Thread Starter
|
Pro Rider
Joined: Mar 2002
Posts: 629
Likes: 0
Default YFZ 450 Problem,Help

any other suggestions or ideas
 
  #9  
Old 04-25-2005 | 09:22 PM
240YBlaster69's Avatar
Trailblazer
Joined: Apr 2005
Posts: 57
Likes: 0
Default YFZ 450 Problem,Help

This happened to my dirt bike but it started to do this to all the gears after a while the problem turned out the carb needed to be adjusted. sucks tho man, definatly when your winning against a faster bike and then blurp and they smoke ya. lol good luck figurin it out man.
 
  #10  
Old 04-26-2005 | 09:19 PM
rc3's Avatar
rc3
Thread Starter
|
Pro Rider
Joined: Mar 2002
Posts: 629
Likes: 0
Default YFZ 450 Problem,Help

so is everyone leaning towards a jetting issue here, or is there any other possible solutions!

RC3
 



All times are GMT -5. The time now is 04:46 PM.