I'm kicking around the idea to build a hillshooter out of my banshee and would like some different input on how to get the most power out of my Shee. Right now I have toomy t5 pipes, carbs bored to 27.5, stock reed cages ported,carbon tech carbon fiber reeds,bored .30 over, ported/polished. What else could I do to make it fly?

 

If you want to run with the big boys you will need to Mill the head for better compression but you will probably have to run high octane fuel depending on how much you have milled off. Advance the timing with a adjustible timing plate this will let your motor rev to the moon also lighten your flywheel for quicker revs and get your tranny cut so you can shift gears at full throttle without using clutch or loosing RPM. And put her on alchohol.

If you just want your bike to run alot better mill 20Thousands off the head you should be able to run 91 fuel advance the timing and lighten the flywheel. This makes a huge difference in acceleration and make sure you have a good port job not a play port.

Good luck.

 

If you wanna run witht he big boys your gonna have to fork out some serious money like the big boys. Period!!! Get a 10 mill cheetah or so. The cubs are looking good so far but to early to tell.

 

I hear ya