Does anyone know which wires to use at the stator to test the stator lighting and power coil? The wires are a different color than my banshee. Thanks

 

The lighting coil is the yellow/red, and black. it should read .16 to .24 ohms.
The pick up coil is the white/red, and black, and should read 16 to 24 ohms
The source coil, black/red, to black, should be 192 to 288 ohms

 

My red and black wire on my stator to my 2001 Yamaha Blaster is not registering on a ohm meter I don't know what it does but I have not been able to get Spark can anyone help please?

 

According to the post above, if you put an ohm meter between black, and red/black wires, you should get 192 to 288 ohms. If you get open circuit, your source coil has had it. You may be able to buy them separate to the stator. Strangely, the parts books don't list a "source coil" at all on the Banshee, just lighting, charging and pulse coils.