my 4 wheel drive works fine.....when i put it in 4x4 diff lock, the diff lock doesnt engage....all it does is blink but never engages haha....can anyone help me fix this problem???

 

you gotta turn the wheels back and forth a few times, maybe rock it too... my dads does the same thing, thats all ya gotta do

 

did that and nothing, it still keeps blinking...is there anythign else i could do?

 

I've had the same thing happen to my 2005 Kodiak 450 in the winter. The manual said it takes a few seconds before it fully engages. Once I hit the diff lock on and waited about 10 or so seconds it stopped blinking and it was ok.

 

i've waited about 2 minutes and it still doesnt engage......that isnt normal i dont think...

 

did you drive forward while waiting? You need to drive forward to get it to lock in sometimes. No biggie

 

ya i tried driving around a bit to try to engage it and other times i've tried just to wait and it doesnt want to engage....

 

when you press the difflock button can you hear the servo motor engaging the locker in the front diff?.....you might have a bad connection that plugs into the servo motor on the front diff.....the 4x4 engagement plugs may be fine but the difflock plugs may be corroded.....take the plug apart and clean it and squirt some die-electric grease into the plug and that should do it.....good luck