where to find analog tach for yfz450
#11
where to find analog tach for yfz450
the problem is finding an analog tach that works for single cylinder motors. I don't know if it would be possible to rig up a ds650 tach to another quad, the only way to find out would be to get one and mess with it. Any aftermarket tach that was designed for a car only works for 4 cylinders or more, and the digital tachs yamaha sells suck ***, they react so slow that if you are at idle and gun it, the thing will be bouncing off the rev limiter before the tach even realizes the rpm changed.
#12
where to find analog tach for yfz450
The analog tachometer can be purchased from JC Whitney. Part number is SW514543T priced at $69.99 plus freight. The catalog lists the tachometer to be 0 – 10,000 rpm but it is really 0 - 8,000 rpm and does not have a visible stop at 8,000 rpm. It will work on 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 & 12 cylinder engines. It can be hooked up to engines that use a distributor and it comes with a spark plug pickup lead for those engines that do not have a distributor. It is 3 3/8 inches in diameter. So far it has been very durable and the quality appears to be very good. It comes with a body clamp but not with a handle bar clamp. One has to fabricate there own mount. The tachometer is 2” deep from the face of the meter to the rear. It can be mounted in a dash that is about 1 ½” deep. Go to jcwhitney.com and paste in the part number. Check out picture.
#14
where to find analog tach for yfz450
I found the 10,000 rpm one. It'll work. What do you think?
http://www.jcwhitney.com/autoparts/I...D:100000295644
http://www.jcwhitney.com/autoparts/I...D:100000295644
#15
#16
where to find analog tach for yfz450
Originally posted by: keelam
I found the 10,000 rpm one. It'll work. What do you think?
http://www.jcwhitney.com/autoparts/ItemBrowse/c-10113/s-10101/p-100000295644/mediaCode-ZX/appId-100000295644/Pr-p_CATENTRY_ID:100000295644
I found the 10,000 rpm one. It'll work. What do you think?
http://www.jcwhitney.com/autoparts/ItemBrowse/c-10113/s-10101/p-100000295644/mediaCode-ZX/appId-100000295644/Pr-p_CATENTRY_ID:100000295644
#17
where to find analog tach for yfz450
Originally posted by: recon99
It should work fine, but my only concern would be how long would it last? I doubt it's waterproof, and it's probably not built tough enough for all the vibrations and bouncing around an atv does. Just something to keep in mind.
Originally posted by: keelam
I found the 10,000 rpm one. It'll work. What do you think?
http://www.jcwhitney.com/autoparts/ItemBrowse/c-10113/s-10101/p-100000295644/mediaCode-ZX/appId-100000295644/Pr-p_CATENTRY_ID:100000295644
I found the 10,000 rpm one. It'll work. What do you think?
http://www.jcwhitney.com/autoparts/ItemBrowse/c-10113/s-10101/p-100000295644/mediaCode-ZX/appId-100000295644/Pr-p_CATENTRY_ID:100000295644
#20
where to find analog tach for yfz450
Originally posted by: recon99
I just looked through the atv section and I sure can't find the tach in there, are you sure that's where you found it?
I just looked through the atv section and I sure can't find the tach in there, are you sure that's where you found it?