If I get the .80 over Wiseco is it just simple bore? NO SLEEVE? What all comes with the gasket kit? I saw there are 2 different kits. One kit and the other says complete.

 

Anyone?

 

I'm assuming the one kit is just 2 gaskets and the other is the cylinder o-ring and any other o-rings? Do I HAVE to replace all the o-rings?

 

I don't think you need to replace the o-ring but you'll need the timimg chain tensioner gasket along with the base and head gasket. You can go at least 2mm without replacing the sleeve.

I'm guessing your talking about a raptor.

 

Yeah I got the tensioner gasket ordered. One other thing. I went ahead and got the .40 over kit. I ordered the Cometic top end gasket kit. Did I have to order special gaskets since it will be .40 over? Sorry to ask so many questions but this is my first time doing any internal engine work and am just taking my time and making sure I get it all right. I really do appreciate the knowledge.

 

you shouldnt have to... at least i dont think so. the only way is if they break when u take it apart.

 

Actually its .080 over, 102mm, 686cc piston. Bore only, largest you can go on a stock cylinder and sleeve. Top end gasket kit is just a base gasket and head gasket, complete has every engine gasket.

 

Well I decided to go with the .40 over instead. Can I use the std. top end gaskets?