01' RAPTOR 660 REVERSE QUESTIONS
#1
02-05-2006, 01:59 PM
Join Date: Feb 2006
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
01' RAPTOR 660 REVERSE QUESTIONS
I RECENTLY JUST PURCHASED MY FIRST RAPTOR AND I AM HAVING SOME PROBLEMS... THE REVERSE SWITCH IS BROKEN, AND I CAN GET IT INTO REVERSE BUT WHEN I AM DOWN SHIFTING IT TRIES TO GO INTO REVERSE IS THERE A WAY TO ADJUST THE CABLE OR ANYTHING? I DON'T WANT TO HAVE TO REPLACE MY TRANSMISSION..IF ANYONE HAS ANY IDEAS OR SUGGESTIONS PLEASE HELP...
#2
02-05-2006, 02:08 PM
#3
02-05-2006, 02:55 PM
01' RAPTOR 660 REVERSE QUESTIONS
Originally posted by: Yamaha660R
You can pick up a Dr. D reverse lever from magicracing.com or rockymountainatv.com and move the switch to your handlebars. It's a really sweet setup, and it's adjustable to tighten the cable where you can't accidently shift into reverse.
You can pick up a Dr. D reverse lever from magicracing.com or rockymountainatv.com and move the switch to your handlebars. It's a really sweet setup, and it's adjustable to tighten the cable where you can't accidently shift into reverse.
#4
02-06-2006, 11:27 AM
Join Date: Feb 2006
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
#5
02-07-2006, 12:23 AM
01' RAPTOR 660 REVERSE QUESTIONS
Just follow the cable from the switch a little way and you will see a fat area, That is the adjustment joint. You cable is to tight for some reason and is pulling on the reverse lever. Also check to make sure the cable bracket attached to the frame under the shifter is not bent.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)