if i just take the oil injection pump off of my blaster and leave the gear in it would it be ok? or should i just pay $30 for the block off kit? I'm getting an aftermarket carb so i have to remove it.

 

sometimes it's called a BLOCK OFF kit for a reason.. think.. hhmm pay the $30 or be cheap and not run it.

 

alright... i guess i'll buy one...probably time to change the tranny oil anyway lol

 

oh one more thing...what kind of oil should i buy for the tranny...i don't have the manual so i'm not sure

 

Remove the clutch side cover,then remove the pin and the plastic drive gear off of the oil pump. Reinstall the cover, with the gear removed the oil pump will function as the block off plate.Plug the hole on the carb,remove the rest of the oil inj. crap and cut the oil lines flush with the side cover.After refilling the trans. with oil you are ready for premix.Save that 30.00 for something else like a adj. stator plate.

 

really? thanks a lot...i won't have to plug the hole on the carb because i'm buying a new one