WARN 424 Q.
Mar 30, 2006 | 03:34 AM
#3
Trailblazer
Joined: Mar 2006
Posts: 44
Likes: 0
WARN 424 Q.
all you need to do is take it apart, clean everything up, put a little grease on the shaft and put it back together. Mine does the same thing after a few muddy rides. There is also an o-ring that seals the shaft that u pull out and push in, make sure it's in good shape. That should fix your prob.
Mar 31, 2006 | 01:04 AM
#4
Thread Starter
|
Pro Rider
Joined: Jun 2004
Posts: 943
Likes: 0
WARN 424 Q.
Originally posted by: WolvyRida
all you need to do is take it apart, clean everything up, put a little grease on the shaft and put it back together. Mine does the same thing after a few muddy rides. There is also an o-ring that seals the shaft that u pull out and push in, make sure it's in good shape. That should fix your prob.
all you need to do is take it apart, clean everything up, put a little grease on the shaft and put it back together. Mine does the same thing after a few muddy rides. There is also an o-ring that seals the shaft that u pull out and push in, make sure it's in good shape. That should fix your prob.
Took it apart, first NO O ring on the Button, second spraied the <B><FONT style="BACKGROUND-COLOR: yellow" face=verdana>Sh^t</FONT></B> out of the ball bearings there stuck in the down possission and wont pop back up!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
Feb 1, 2022 11:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)