Yamaha Discussions about Yamaha ATVs.

raptor 660 is screwed

Thread Tools
 
Search this Thread
 
Old Jul 15, 2006 | 08:37 PM
  #1  
kny660's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2006
Posts: 19
Likes: 0
Default raptor 660 is screwed

ok, DriverDoyle if you get this, i need your help... my raptor is friggin screwed.. i had it running like a champ 2 days ago, then all the sudden it bogged, seemed like it was starving for gas, then died.. now today, i go to start it, and it feels like there is no compression at all, it just spins and spins, but its not the woodruff key, i was wondering if the one-way could be out because every few spins i can here it compress somewhat, and when we pull it, it does the popcorn exhaust bit when i flood the hell out of it... any ideas? this thing is on my last nerve..
 
Reply
Old Jul 15, 2006 | 10:39 PM
  #2  
texraptor's Avatar
Trailblazer
Joined: Nov 2005
Posts: 39
Likes: 0
Default raptor 660 is screwed

Have you done a compression check.If it was running and it started to bog down.I don't think it could be the one way.Check the breather vent on your gas cap.If it is plugged it would vapor lock the fuel system.
 
Reply
Old Jul 15, 2006 | 10:50 PM
  #3  
kawiking's Avatar
Pro Rider
Joined: Jun 2005
Posts: 978
Likes: 0
Default raptor 660 is screwed

check your air intakes on the carb. my kfx was running real good one day,stopped turned it off ,went to move it about 15min later and it wouldnt start. finally figured out the tube from the carb to my air filter(clamp on) came loose. just barely!!. put it back on and tightened it tight anf she started right up. good luck.
 
Reply
Old Jul 16, 2006 | 04:45 AM
  #4  
kny660's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2006
Posts: 19
Likes: 0
Default raptor 660 is screwed

thanks guys, i'll give it a try
 
Reply
Old Jul 17, 2006 | 01:17 AM
  #5  
kny660's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2006
Posts: 19
Likes: 0
Default raptor 660 is screwed

ok, update, did all the above, everything good, it shows nothing on the compression meter, sounds like it turning over, and part of the assembly is eg. timing marks, yet its not pushing the crankshaft over and compressing, so i'm convinced it's the one way.. i've heard not to go with oem, so what would you guys recommend?
 
Reply
Old Jul 17, 2006 | 01:40 AM
  #6  
DriverDoyle's Avatar
Pro Rider
Joined: Mar 2005
Posts: 1,674
Likes: 0
Default raptor 660 is screwed

Sorry iv been busy all weekend..It looks like to good buds of mine got you going txraptor and kawiking...Here is the starter clutch i have in mine..I think its the best one made..LA Starter Clutch
 
Reply
Old Jul 18, 2006 | 07:01 PM
  #7  
kny660's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2006
Posts: 19
Likes: 0
Default raptor 660 is screwed

dude... your the man
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jackg17
Ask the Editor
7
Jul 16, 2018 04:01 AM
Beeline08
Yamaha
3
Nov 11, 2016 04:00 PM
ATVC Correspondent
Performance Mods and Project Quads
5
Oct 10, 2015 10:20 AM
Jackg17
General Chat
0
Sep 26, 2015 09:30 PM
black_thunder
ATV Videos
0
Sep 22, 2015 07:59 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:40 AM.