i was riding yesterday over in the mountains and it was fine, no noise coming from the tranmission or clutch, i was riding for about one hour until i stopped to wait for someone, and when i tried to change gear to first, it wont change, so i tried changing to second and it wont change either, so i changed raptor with my dad and he took it to try to find out what was wrong and the same thing happend to him
its like if the shifter was glued or something because it wont change gear, then my dad finally got it to change gear but he had to pull on the shifter hard so that it would change gear, we were probably like 10 miles away from our camp and all the way down he brought it changing gears with his hand, all the gears went it but it was hard to change gear [img]i/expressions/face-icon-small-confused.gif[/img]

whats wrong?

 

Umm i think you may have bent a shifting fork...

Is your clutch working fine?

 

yes it working fine, when i noticed it wasnt shifting i was in first gear on a dead stop, so i had use the clutch to get started, but second gear wont go in unless i use my hand

yea i thought it was a bent fork, i'll have to open it up to find out what it is

 

I hope that is what it is..That the cheeper thing that can go wrong..I hope you did not chip a tooth on a gear and it has it in a bind...

Good Luck

 

ok i took it to the shop and they fixed the problem in about 10 seconds, the lower bolt of the case saver was loose and wasnt letting the shifter go up, i felt very dumb when they told me it was that little bolt, but its back and its time to ride

 

yeah that was a cheap fix

 

it was free