cylinder removal on 2002 yamaha wolverine
#1
#2
cylinder removal on 2002 yamaha wolverine
when i adjust the valves on my 350 i used a screw driver take the spark plug out and i find it easier to just take the side plate off so you can get to the bolt that goes to the crank its easy to get to just a few bolts get a socket that fits it and slowly turn it over and with the screwdriver u can feel when the piston reaches the top...
#3
cylinder removal on 2002 yamaha wolverine
Take the cam timing gear cover off - since you are pulling the head, you will need to have this cover off anyway to get the cam gear and then timing chain off. The cam gear has an indexing mark stamped into it. That mark has to line up with the index mark cast into the head itself at approx. 12 O'Clock in the cam gear opening. It's along the same plane as the O-Ring mating surface for the cover.
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
07-07-2015 11:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)