jetting?? for pwk28 on blaster
#1
jetting?? for pwk28 on blaster
This is my first post on the site, and im hoping somebody can help me out....
I just bought a new keihin pwk28 for my 2000 blaster. the blaster drivetrain upgrade are as follows:
-cylinder port and polish
-high compression head(gasket kit)
-61mm (1mm over) weisco piston
-raised cylinder base(exaust port timing)
-boysen power reeds
-0.5" reed spacer
-fmf expansion chamber and muffler
-k&n air filter w/outerwear
-stock airbox lid removed
-oil injectors blocked off
i usually ride at altitudes between sea level and 5,000 ft...
anybody have any suggestions on the jetting of the new carb??? thanks.
I just bought a new keihin pwk28 for my 2000 blaster. the blaster drivetrain upgrade are as follows:
-cylinder port and polish
-high compression head(gasket kit)
-61mm (1mm over) weisco piston
-raised cylinder base(exaust port timing)
-boysen power reeds
-0.5" reed spacer
-fmf expansion chamber and muffler
-k&n air filter w/outerwear
-stock airbox lid removed
-oil injectors blocked off
i usually ride at altitudes between sea level and 5,000 ft...
anybody have any suggestions on the jetting of the new carb??? thanks.
#2
#3
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)