660 starting question
Mar 4, 2007 | 05:45 PM
#1
Thread Starter
|
Trailblazer
Joined: Jan 2007
Posts: 87
Likes: 0
660 starting question
02 Raptor 660
When I was running the stock clutch lever and perch, I was able to start my quad in any gear as long as I had the clutch engaged. I swapped the stock lever and perch with an aftermarket lever and perch and since then I am not able to start my quad unless I'm in neutral. Does this have anything to do with those 2 electrical wires on the stock perch?
When I was running the stock clutch lever and perch, I was able to start my quad in any gear as long as I had the clutch engaged. I swapped the stock lever and perch with an aftermarket lever and perch and since then I am not able to start my quad unless I'm in neutral. Does this have anything to do with those 2 electrical wires on the stock perch?
Mar 5, 2007 | 02:38 AM
#2
Pro Rider
Joined: Jun 2002
Posts: 1,637
Likes: 0
660 starting question
um, yeah. [img]i/expressions/face-icon-small-smile.gif[/img] +
you can tape them together but then anytime you hit the start button it'll try to start.
quite a dilemma there.
[img]i/expressions/face-icon-small-wink.gif[/img]
you can tape them together but then anytime you hit the start button it'll try to start.
quite a dilemma there.
[img]i/expressions/face-icon-small-wink.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
armpump450r
Technical and How-To Articles
7
Apr 1, 2017 06:11 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)