How do you compress the piston on the rear caliper to put in new brake pads on a 660 raptor. I can't find anything solid on the backside of the caliper to use a c clamp. so i was wondering how everone is doing it out there! please respond quickly! Thanks!

 

Make sure you loosen the nut and back of that big bolt! Usually it is no problem to compress the cylindar, but many people forget to back of the adjustment bolt (so the new pads wont fit).

 

If thats not the issue (but probably is), open the bleeder, then the piston will go back in easy.

 

Oh yeah. What he said. Open the bleader and then you can push it in with your fingers.