Yamaha Discussions about Yamaha ATVs.

first atv..07 Wolverine 450...help with mods

Thread Tools
 
Search this Thread
 
Old Mar 27, 2007 | 09:35 AM
  #11  
ctateusa1's Avatar
Pro Rider
Joined: Nov 2006
Posts: 1,697
Likes: 1
Default first atv..07 Wolverine 450...help with mods

The BMP cdi unit when available will probably(since its not out yet I dont know for sure) just raise the rpm that it will let the engine run and give the top speed another couple of mph.

I dont know if it will get rid of the reverse rev limiter ( I hope that it does).

But there is no real gains to be had by just the cdi, it will work much better with the pipe, filter, jet kit and possibly the EPI clutch kit.

I think that the cdi will be about 150.00
 
Reply
Old Mar 27, 2007 | 10:12 AM
  #12  
u1arunit's Avatar
Pro Rider
Joined: Nov 2006
Posts: 269
Likes: 0
Default first atv..07 Wolverine 450...help with mods

I think if the CDI has a revised timing map in it, there is a very good posibility that it could help somewhat by itself.
 
Reply
Old Mar 27, 2007 | 10:17 AM
  #13  
ctateusa1's Avatar
Pro Rider
Joined: Nov 2006
Posts: 1,697
Likes: 1
Default first atv..07 Wolverine 450...help with mods

True, but when I was talking to my local dealer, they said you will not notice much with it by itself, it is much better to use it after you have your other mods done, because you dont even hit the rev limiter stock(even at full throttle)
 
Reply
Old Mar 27, 2007 | 04:32 PM
  #14  
samforbes's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2007
Posts: 3
Likes: 0
Default first atv..07 Wolverine 450...help with mods

well im glad that you all know things about all of this otherwise i would be in the dark...lol...anyway...thinks for the throttle limiter info....after i get my wolverine broke in ill let you all know how its goin...ive been having alot of fun on it the last few days...but its been mudy and snowy...but still fun..lol..thinks again for all the help.
 
Reply
Old Mar 27, 2007 | 04:52 PM
  #15  
07Wolvey450's Avatar
Pro Rider
Joined: Jan 2007
Posts: 234
Likes: 0
Default first atv..07 Wolverine 450...help with mods

no problem. just make sure you help out someone new when they need it, lol. and who cares what its like outside mud and snow is the best weather for fourwheeling. just make sure you wash it enough and keep it clean. wash it after every mud ride when you can if its above freezing.
 
Reply
Old Mar 28, 2007 | 07:50 PM
  #16  
Widow317's Avatar
Weekend Warrior
Joined: Mar 2007
Posts: 3
Likes: 0
Default first atv..07 Wolverine 450...help with mods

Also to add one thing..ive noticed other people having the same problem as myself...re-route the carb vent line to the air box...helps so much...poor wolvies sometime spit and spudder when water splashes up where the fac tory puts them..
 
Reply
Old Mar 28, 2007 | 09:14 PM
  #17  
u1arunit's Avatar
Pro Rider
Joined: Nov 2006
Posts: 269
Likes: 0
Default first atv..07 Wolverine 450...help with mods

Originally posted by: Widow317
Also to add one thing..ive noticed other people having the same problem as myself...re-route the carb vent line to the air box...helps so much...poor wolvies sometime spit and spudder when water splashes up where the fac tory puts them..
When I re-jetted mine I relocated mine to the air box lid area. I made the one unused hole larger to fit the hose with a nice snug fit and put it next to the other vent tube that was there from the factory.

Funny thing is, I did this since I couldn't figure out where the carb vent hose was SUPPOSED to go after taking some stuff apart. lol
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Customer Service #1
Arctic Cat
73
May 15, 2020 08:46 AM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
Sep 23, 2015 06:23 AM
PrairieDog126
Polaris
5
Sep 16, 2015 01:33 PM
1ArmBandit
Polaris
0
Sep 8, 2015 08:59 PM
JakeXBL
General Chat
8
Sep 5, 2015 01:08 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 12:58 AM.