attn: vmax1500
#1
#2
I used a "universal" setup for dirtbikes/atv's. Motion Pro "Turbo" twist throttle p/n: 01-057.
The cable I used was definatly for a dirtbike since it is little too long for the atv. But, I re-routed it to take up the slack without putting the cable in a bind, or in harms way.
The cable was Motion Pro p/n: M.P. 01-236.
This cable may be avialable in shorter lengths with the same ends, but, the shop I was at didn't have it in stock, and this worked for me.
I ended up shifting everthing to the left on the handlebar, kept the housing so the 4wd switch would have a mounting place, but removed the thumb lever & linkage inside the housing. (Be sure to plug up the holes).
I'll never go back to a thumb throttle again!!!
The cable I used was definatly for a dirtbike since it is little too long for the atv. But, I re-routed it to take up the slack without putting the cable in a bind, or in harms way.
The cable was Motion Pro p/n: M.P. 01-236.
This cable may be avialable in shorter lengths with the same ends, but, the shop I was at didn't have it in stock, and this worked for me.
I ended up shifting everthing to the left on the handlebar, kept the housing so the 4wd switch would have a mounting place, but removed the thumb lever & linkage inside the housing. (Be sure to plug up the holes).
I'll never go back to a thumb throttle again!!!
Thread
Thread Starter
Forum
Replies
Last Post
aaronrkelly
Kids Quads
1
02-25-2010 07:58 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)