i wanted hydrolic disc brakes in the back if my blaster so my father found a banshee at a friends house that had all the parts we needed so we fabed up a few spacers and mounts and put it all together . now the blaster has a banshee rearend along with hydrolic rear brakes and is about 3 inches wider in the back. it looked kinda funny so we took and swaped the front tires and put the rims on backwards so they stuck out and matched. now the bike looks 100 time better and stops a million times better.

 

Pictures?

 

yeah i'm going to convert my front brakes on my 2001 blaster just donno when yet

 

pictures to come

 

Mine was accomplished with the help of ebay.

I bought a frame (about $150) and a rear hub/bearing carrier (about $28) and the brake system with mounts/bolts ($85) puts me about 263 bucks back, but I also have the correct frame to do the fronts later. Front's will cost over 300 best I can tell. So A complete brake conversion, since I have no better source for parts, is barely under 600 bucks. Doesn't do much for re-sale either. ( I have already begun to purchase those parts too, Brake handle and reservior was 22 bucks,.......) All my pricing is including shipping costs.

Forgot the correct rear axel,.......I got a pretty good deal on it with "buy it now" for 80 bucks too and the rotor and hub was 12 bucks,....over 300 now huh?

Looks like one with the right factory parts,.......pictures would show that on all of the 03-06 models.