weather permitting this weekend we'll be riding in masontown and isabella! (you'd just come past where we met at penn state about 15 minutes)

 

I would like to get into riding in other states. I did hear alot of good things about riding in PA.

IronBear

 

dseater, How is the riding there is it worth the drive for me. I'll come down and ride if it is good riding and you'll have to come ride up my way some time alot of cool hills/technical riding I wanna get my raptors seat height down for some of the off camber trails I ride on. What do you mean weather permitting all weather is permitting hehe we ride everyweekend snow/rain whatever the raptor with the stock radials goes great in the snow! Let me know what day and I'll get some of my buddies and we'll come down sat or sun let me know what time. e-mail me your # and I'll give you a call or I'll get you my #.

 

xtreme & gang,

What is the web address for TC Racing? Phone # is ok, but I'd rather browse about myself.

 

what jets did he put in and did he do anything else to the carb like air screw or pilot jet. I live in Maine so the chances of my getting my Raptor to TC is slim to none.

Thanks in advance - glad to hear you like it>>

BJ

 

did he give you your pipe for free? if he kept it that long he should have, most pipe manufactures say the giggest restriction is the head pipe,could you post the jetting

 

Do you have any pictures of the finished product ?

 

NC, TC doesnt have a web page and he doesnt addvertise in mags! TC phone # is (814)723-3514

 

Raptorfast, I am not sure what jets he ended up going with he said it took 4 tries to get it perfect and as far as air screw and pilot I am not sure you can call him and he'll let you know Tom is a super nice guy. He said he would supply jets with exhaust for and extra $20 but I am sure he'll give you the info over the phone! Tell him Rich with Raptor told you to call. (814)723-3514

 

badraptor, No I didnt get the pipe for free, the reason it took so long is it was below 0 temp up there and he didnt want to tune the bike in with it being that cold out! As far as the head pipes I asked him about how all the other companies are saying that there to small and restrictive and he said that the head pipes are a great design. Its a money maker for companies and plus TC builds his own pipes and he said the raptor doesnt need differant head pipes he said he can build head pipes but its a waist of money for his customers.
As far as jetting he said it was hard to get the carbs perfect took him 4 tries so I am not sure what jets he ended up putting in, he told me he would supply jets to people for $20 with purchase of pipe but I'm sure he'd tell you the jetting if you called. Look at above post for #.