first off . thank all you guys, your helping alot.

but i think i might have some water in my engline
if it does how could i get it out?
like when i try and start the 4 wheeler it act likes it wants to start but dont
if i try and start it in 1rst or 2nd gear it jumps forward alittle but wont start up

tomarrow im going to change the oil and put brand new gas in it. i hope it works when i got it the guy said all i need to do is but something around the carb boot to fix that small hole. and get a new battary. iv done both of those so im pretty sure it needs new gas and oil because it was raining the day i got it and it had no gas lid on it.
and when i pull started it by pulling it down the road with a trx450 it would die everytime i slow'd down and wouldnt get gas when i had it started. it would make the vroom vroom sounds when i hit the gas but never would go forward. maybe thats because there was water in the gas? i only put 4dollars worth of gas in it anyways and not alot of oil at all

 

When you get done draining the the fuel and put new oil in, take out the spark plug and turn the motor over a few times with out it. That way you can evacuate any moisture that may be in the cylinder. Also be sure to drain the fuel from the float bowl in th carb, it will still have old gas in it unless you do this. Let us know how it goes. As for water in the engine, if any at all, it will be on the left side of the engine. Just pull the cover off, drain the water and dry everything with a lint free, dry cloth or an air compressor if you have one. Make sure the gasket is in good shape, re-install.

 

ok i just now took out the gas tank, there was a huge piece of frozen water in it. that was probly the problem. i changed the oil.
and the gas tank is in my yard setting in the sun to melt the piece of ice in it. after its dry im going to re install it and put more gas in. and try it then.
how do i turn the motor over?