Crack In Crank Cask
#1
Crack In Crank Cask
I have an 87 warrior and the part of the crank case that the chain gaurd bolts into broke off at the top or in other words it broke off were the top bolt hole is for the chain gaurd. This left a whole in the crank case about 3/4 to 1 in wide. I tried fixing it with jb weld and it worked for a wile but then got a little crack in it wich gave me a slow oil leak. I did do this during winter so mayde the JB Weld didnt set right but if anyone knows a different way to fix this without takeing the crank case apart let me know. Thanks, Mark
#2
Crack In Crank Cask
depending on the location and how easy it is to get to. you might be able to take it to a local machine shop or welder. or someone who can weld aluminum and go from there. shouldn't be to hard to do. i'm surprised the JB weld didn't hold but then again that is a big hole.
#3
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)