hey what do you guys use for oil in your warrior? and how much does it hold?

 

the age old oil question...Ask 30 people you will get 30 answers..I use AMSOIL 4-Stroke Synthetic Motor Oil SAE 0W-40 except when I am doing a top end job..To seat new pistons and cams it is best to use Yamalube 10w-30 (non-syn)

 

I use Spectro offroad 4. Its a 20w50 semi synthetic and is 9$ a quart. My warrior takes about 2.5 quarts. It says 2500ml on the side of your engine, and if you look on the side of the oil bottle it says 1 litre (1.065 quarts). So buy 3 bottles of oil, and you'll have some left over. Also I run Bel Ray 20w50 Thumper oil in my klx250 and xl125 and that is good too. There has been a prevous thread that helped me with oil amount.

http://forums.atvconnection.co...tid/13/threadid/537292

 

hey thnx i use maxima 80 in my kx250 but i thinmk i will go with yamalube i have a dealer pretty close by. this is a stupid ? and my 1st atv but where is the oil filter? i haven't gotten to exploring it all the way through.

 

you can probley buy a cd of the shop manual on ebay for a couple bucks..Use the Yamalube 4 stroke oil..If you want to use Yamalube..Pretty sure the oil filter cover is on the right side,you can tell by the 3 triangle allen bolts..

 

okay take back last post i found it right above the shifter three hex bolts.