Blaster help
#2
Could be the jetting is off, causing it to miss now and then, also could be electrical, a short in the system somewhere causing it to short out now and then. Exposed wires, loose connection, something of the sort. Check your plug tip(end that goes in cylinder head) too to make sure it isn't fouling, if it is very dark, black, then its fouling and running to rich, if its white or almost white, then its running lean...both of which are carburetor related and jetting. If its tan in colour then it should be fine.
Also check your airfilter, could be a dirty filter is making it run poorly.
-Krait
Also check your airfilter, could be a dirty filter is making it run poorly.
-Krait
#4
Broken/worn out reeds would be the first thing I would check. If you can see light through where it seals when they are supposed to be closed, they need to be replaced.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



