Yamaha Discussions about Yamaha ATVs.

blaster 240 help

Thread Tools
 
Search this Thread
 
Old Jun 15, 2008 | 01:59 AM
  #1  
bfastorblast's Avatar
Thread Starter
|
Trailblazer
Joined: Dec 2005
Posts: 57
Likes: 0
Default blaster 240 help

hey guys i have a 240 vitos on my blaster and i have a problem.... it starts good it idles good but as soon as i go it bogs really bad but sometimes when i hold it pinned it runs like always but only pinned. i cleaned the carb i clean air filter did an oil change but i dont think that matters also i looked down the cylinder and its really oily like thick. also this started to happen as soon as i tried race oil but i drained the tank and put in the stuff i normally use but still bogy.

thanks
 
Reply
Old Jun 15, 2008 | 03:29 AM
  #2  
bfastorblast's Avatar
Thread Starter
|
Trailblazer
Joined: Dec 2005
Posts: 57
Likes: 0
Default blaster 240 help

hey i fixed it! it was the reeds one of the screws fell out on the carbon fiber thingy so i put a new on in runs like a top just in case some one cared
 
Reply
Old Jun 15, 2008 | 07:05 AM
  #3  
hotblooded's Avatar
Pro Rider
Joined: May 2007
Posts: 487
Likes: 0
From: Westcentral WI
Default blaster 240 help

Man can I relate to that, my son had practiced up in Staples MN and ran fine. He went to go to the starting line and it is like it ran out of gas. I had the carb apart 3 times before i thought about looking at the reeds. A reed in the Delta V-Force fell out and was blocking the intake port. Talk about frustrating, there is something to be said about the stock reed block.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ahtatu
General Chat
9
Sep 28, 2015 12:14 PM
nastyblaster100
General Chat
2
Sep 13, 2015 01:19 PM
1966F100
Yamaha
5
Aug 21, 2015 07:10 PM
scott1988
Yamaha
9
Aug 18, 2015 08:44 AM
315blaster
Other ATV Topics
0
Aug 8, 2015 08:13 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:43 AM.