if i wanted 2 drag my raptor to go like 120 mph what can i do expect for changing the gear ratio?

 

big **** front sprocket, small back, lowered, rev box, p3 controller

 

Seriously doubt you could ever get your Raptor to go 120 mph. 90 mph might be more realistic with the Raptor engine, but that's still pushing it. You would need several thousand dollars and: big bore/stroker high compression kit, cam, port and polish, valve job, possibly nitrous, lighten it up as much as possible, lightened flywheel, lock-up clutch, etc..........

 

it will hit 90 n/p with like a 16 or 17 tooth. 120 i dont know im trying to find a gearing chart. i would think need to be a 20 tooth min. as far as mods to get going that fast not sure what kind of hp you would need. depends how long you got to get going. but it can be done no problem. the best raptor 700 builders are tim barker, rocket factory, kenz cycle and racer edge. they can make you as much hp as you want pretty much. kenz and rocket factory have no problem building you a 100+hp raptor if you got the $. and racers edge can get you 75-80hp for like 3k on a stock bore. tim barker just developed a new cnc machined p&p that has crazy good flow bench numbers but has not built a ton of raptors yeat but is work is top notch.

 

that sounds awesome but yeah i still want to trail ride and all so i dont wanna change the sprockets and **** if it takes me a while to go faster

 

you will never hit over 80 with stock sprokets.

 

yeah i know but ill need a new chain if i wanna change the sprockets rite?

 

i think if do if you go over 16. i know for a fact you can do 15t which people love for dirt. they say way less wheel spin but the power down low is still there.

 

get a turbo for it and gear it how ever you want to, if that dont work put a 600cc street bike engine in it

 

There is an easy formula for gearing:

____<u>ENGINE RPM</u>____ x Rolling radius of rear tires x .0059
Over all reduction

Random Example: if you had

2:1 primary reduction
1.23:1 fifth gear
<u> 2.75:1 final drive </u>
6.765:1 overall

9000rpm/6.765 x 9.5"(approx. rolling radius of 20" tire) x .0059 = 74.56 mph

9000rpm/6.765 x 10.5(22" tire) x .0059 = 82.42mph