I have a Yamaha grizzly 80cc that I use for horse shows to tote equipment back and forth from my horse trailer to the stalls. Is anyone aware of a front rack that would work on it?

 

I still have the brochure from 2005. It shows the Grizzly 125 with rating of 11lbs front rack and 22 for the rear. The Grizzly 80 says it is 11 for the rear. I assume that if you were to put a front rack on it the capacity would be around 5 lbs.

 

I need to know where I can purchase a rack that works. The Yamaha site is a little misleading because the rack listed there only works on the full size models. I was looking for an after-market source.

 

Why not find one off a junk wheeler and cut it to work, or fab one up out of wood or scrap metal? It seems that it wouldn't be to hard, just trying to figure out mounting points would probably be the hardest part.

 

Well of course they don't make one for it. It isn't much use if it will only carry 5 pounds. I think all you are going to be able to do is to try to make up something your self.