warrior

Reply Subscribe

Thread Tools

Search this Thread

Oct 31, 2008 | 12:46 AM

Andrew

Thread Starter

Trailblazer

Joined: Jul 1999

Posts: 40

Likes: 0

warrior

it has good spark and I just rebuilt the carb if the air screw mixer is not right will it not run and if so what is it set to I set it to 1.5 2 turns

Oct 31, 2008 | 01:06 AM

beefy46172

Pro Rider
Loves To Ride!

Joined: Nov 2007

Posts: 626

Likes: 0

From: Greencastle, IN

warrior

Its a fuel screw, but yes that is close to factory spec and it should at least run. Getting good compression and fuel flow to the cylinder? Valves adjusted properly?

Oct 31, 2008 | 10:19 AM

Andrew

Thread Starter

Trailblazer

Joined: Jul 1999

Posts: 40

Likes: 0

warrior

no its the air screw. if the valves were off would it not run. it run befor i rebuilt the carb but it would pop and die. I just dont know what it is? I just got a new coil

Oct 31, 2008 | 11:38 AM

beefy46172

Pro Rider
Loves To Ride!

Joined: Nov 2007

Posts: 626

Likes: 0

From: Greencastle, IN

warrior

It very well will still run if the valves are off, just maybe not good. I just posted directions in this thread on how to adjust http://forums.atvconnection.co...tid/13/threadid/553815