Recently my 2003 350 wolverine has started acting up.

I have a really hard time getting it to shift into neutral, and recently it won't hardly go into neutral at all. I also have trouble shifting up through gears, it may take 2-3 hard pushes/pulls to get it to shift, its particularly noticeable in the lower gears. Most of the gears it shifts through fine, its just going from reverse-neutral-first that I have lots of problems.

Also, when I'm in first and shift down, it will either stay in first, or will shift into reverse automatically, without twisting the reverse button. Likewise when i shift up from reverse, it goes straight to first.

Also, when its running, its darn near impossible to get it to shift into/out of reverse. I have to shut off the engine, then shift, at which point it shifts fine and I restart it.

Any suggestions? I'm hoping this can be fixed by adjusting the clutch, but want to know which way it needs to go.

Other then these shifting problems it runs great, full power in all gears

Thanks

 

the older 350's see this problem allot ..You need to adjust your reverse cable,mine was always a pain to find neutral..