or you can go to bikebandit.com and get a parts diagram

 

Sorry for the thread hijack where could I find the Valve clearance settings for our YFM200DX(A) many thanks mark - ps the tractors look great!

 

Correct me if im wrong but 2 strokes dont have valves to adjust. The YFM 200 Blasters always have that rattling noise from the top end..

 

There is a cap far behind the shaft, I suggest putting new gear oil in it. So far I havnt did it to mine and i had it for 2 years + now, mine runs like a champ when it warms up, Honestly I wish the 5th gear was higher :/ I get it to like 45~50 mph in almost 5 seconds when it warms up. Plus make sure you check what type of air filter you have on it, when i bought mine it was a thin paper like foam filter that was horrible nasty, and I bought a Uni air filter for it and had alot more grunt when i did it lol. And check what type of jets you have, if they are anything under 20 i suggest gettign bigger ones or you'll have a burnt pistion, ( thats what the guy told me at the shop). And something I NEVER knew until recently, there a decompression lever on the right side of it, there suppose to be a cable to adjust it but mine doesnt have it.