Yamaha Discussions about Yamaha ATVs.

banshee bogs down

Thread Tools
 
Search this Thread
 
  #1  
Old 03-09-2009, 08:30 PM
luisitoelmejor's Avatar
Weekend Warrior
Thread Starter
Join Date: Dec 2008
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default banshee bogs down

So i was riding my banshee yesterday giving it full gas cause i was racing some dude and all of a sudden it shut down in 5th gear. I thought at first it was the spark plugs so i replaced them with some brand new ones. I couldnt kick start the banshee up so i turned it on by getting pushed and releasing the clutch. I gave it full gas and it started making popping noises and it wasnt getting the same reaction it was before. Does anyone have any idea what could be wrong?
 
  #2  
Old 03-09-2009, 09:40 PM
Sidewinder500's Avatar
Pro Rider
Join Date: Mar 2004
Posts: 1,084
Likes: 0
Received 0 Likes on 0 Posts
Default banshee bogs down

Check your compression (should be around 125lbs) and your reeds
 
  #3  
Old 03-09-2009, 09:42 PM
91Warrior357's Avatar
Pro Rider
Join Date: May 2008
Location: Purcellville.
Posts: 1,860
Likes: 0
Received 0 Likes on 0 Posts
Default banshee bogs down

does your bike have TORS?(throttle over ride system) its a funky looking thing that sits on tops both your carbs, also when you try to ride it shut it off and see if one of your pipes is hotter then the other and try to see if one side smokes more then the other, hopefully its just your carbs either the tors junk acting up or the carbs might be clogged with a little bit of dirt.
 
  #4  
Old 03-10-2009, 12:35 AM
luisitoelmejor's Avatar
Weekend Warrior
Thread Starter
Join Date: Dec 2008
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default banshee bogs down

yea it has tors and the left pipe is the only side blowing out smoke. is that cause the right carb isnt working?
 
  #5  
Old 03-10-2009, 01:02 AM
JLsparky7's Avatar
Pro Rider
Join Date: Mar 2004
Posts: 1,763
Likes: 0
Received 0 Likes on 0 Posts
Default banshee bogs down

Sounds like you blew it up. As mentioned earlier do a compression test.
 
  #6  
Old 11-08-2009, 02:53 PM
yamaha 4 life's Avatar
Trailblazer
Join Date: May 2009
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Default

how will you know if your motors blown up, because i just recently bought a banshee and dont really know a whole lot about banshees yet and some problems they usualy have so any help would be great specily with rebuilds and when ill know when to. thanks -cj
 
  #7  
Old 11-26-2009, 10:37 PM
b_s_chance's Avatar
Weekend Warrior
Join Date: Jun 2008
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default compression.compression.compression

the best way to monitor and diagnose is a compression test...125 psi should be close maby 5 or so psi lower..and iF one side is lower then u most likely dropped a cylinder..when and if u rebuild...check compression...use that check for a base line..every 3 or 4 rides check compression you can usually make a top end last 3 or 4 times longer by doing this.compression goes down a little. set of rings and quick clean up hone and your in business!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hueby
Kawasaki
1
11-06-2015 11:34 AM
handyjc1
ATC 3-Wheelers
1
10-23-2015 07:15 PM
Sassinm1
General Chat
1
09-30-2015 04:23 AM
essonlaker
Polaris
4
09-10-2015 01:12 PM
spark1051
Utility ATVs
2
09-04-2015 07:58 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: banshee bogs down



All times are GMT -5. The time now is 04:43 AM.