Wolvy Finished! CHECK IT OUT!!!
#1
Wolvy Finished! CHECK IT OUT!!!
Ok, today I finished my snorkel, installed a 2inch lift and my new wheels and tires came in. They are 26x9x12 abd 26x11x12 zillas on ss312 wheels. took it for a ride down the street and actually rides pretty good for aggressive tires. I'm now gettin about 11 1/2 inches of ground clearnace now. the pics are in my garage, let me know what you think
#2
#3
to be honest, i haven't had a chance to really ride it yet. there is less low end b/c the added weight and increased tire size. i plan to eventually put a clutch kit in and get the sheave machined to regain the power. the lift i got from someone on here. he had an extra 1 sold i picked it up from his house. the only problem i had with it is that it didn't clear with stock wheels. it rubbed the tires. the new wheels have a much deeper offset and actually stick out almost an inch further than the rears so i may get some spacers for the back.
#4
#5
#6
Wolvy Finished! CHECK IT OUT!!!
that would be helpful. I was going to use the stock air box but it is not even close to being water proof so i ordered a custom from www.alljackdupatv.com. They pressure test there custom boxes and they will do a full install but all I ned was the box I can finish the rest.
#7
My intake snorkel finished
Just finished intake snorkel and I am real happy with the way it came out here is some pics
Custom intake box
side shot
front shot
side shot entire atv
rear shot
piping around shock
piping from air box over exhaust with heat wrap
another shot of piping around shock
Custom intake box
side shot
front shot
side shot entire atv
rear shot
piping around shock
piping from air box over exhaust with heat wrap
another shot of piping around shock
Trending Topics
#9
custom intake snorkel box
Just go to this web site and call them and tell them your year wolvy and they will build one.
It comes powder coated with a uni filter already installed it cost 200$. All I had to ad was a rubber gasket to the top cover.
alljackdupatv.com - Home
It comes powder coated with a uni filter already installed it cost 200$. All I had to ad was a rubber gasket to the top cover.
alljackdupatv.com - Home