wolverine backfiring

Reply Subscribe

Thread Tools

Search this Thread

Oct 6, 2009 | 10:40 AM

01wolvie

Thread Starter

Weekend Warrior

Joined: Sep 2009

Posts: 9

Likes: 0

wolverine backfiring

i have a 2001 wolverine that just keeps backfiring through the carb. has new plug. already adjusted valves. cleaned the carb. any suggestions on where to go next? any help would be greatly appreciated!!!!!

Oct 6, 2009 | 04:12 PM

B250Xrider

Weekend Warrior

Joined: Sep 2009

Posts: 11

Likes: 0

The pilot screw on the carb adjusted properly? Just had this problem with one of my warriors and the pilot screw was out a full turn too much.

Oct 6, 2009 | 06:34 PM

01wolvie

Thread Starter

Weekend Warrior

Joined: Sep 2009

Posts: 9

Likes: 0

are you talking about the idle mixture screw? if so that is ok it is only out 1 turn.

Oct 6, 2009 | 07:00 PM

B250Xrider

Weekend Warrior

Joined: Sep 2009

Posts: 11

Likes: 0

Yeah the only adjustment on the outside of the carb besides the idle screw, on the warrior it is supposed to be out two full turns? Give that a try on that wolvy