2001 660 raptor problem/ help needed!
Oct 13, 2009 | 01:29 AM
#1
Thread Starter
|
Weekend Warrior
Joined: Apr 2005
Posts: 23
Likes: 0
From: Kentucky
2001 660 raptor problem/ help needed!
well i started my 01 660 up today and started to take a normal ride
on the local back rode highway today and the raptor seemed to do fine in 1st,2nd,and 3rd gears, but when i when to 4th and 5th it was fine for a while but then started a load scraping noise(doesn't sound like gears grinding) from the engine,and it was slowing the atv down like a brake was being held but it would stop doing this when i pulled the clutch in.
any ideas on this issue?
on the local back rode highway today and the raptor seemed to do fine in 1st,2nd,and 3rd gears, but when i when to 4th and 5th it was fine for a while but then started a load scraping noise(doesn't sound like gears grinding) from the engine,and it was slowing the atv down like a brake was being held but it would stop doing this when i pulled the clutch in.
any ideas on this issue?
Oct 14, 2009 | 08:26 PM
#3
Trailblazer
Joined: Nov 2008
Posts: 84
Likes: 0
I know you said it didn't sound like gears, and I don't know if you know this already...but the 2001 raptors have a known gear issue. Do a search on here, there's a few threads about it. Sorry, only help I could think of bro... GL
Thread
Thread Starter
Forum
Replies
Last Post
jrooker6
Ask the Editor
11
Apr 21, 2016 07:35 PM
Big600twin
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
Jun 16, 2015 09:30 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)