I have weak spark on my machine. I replaced the CDI box to no avail. I checked the ohms of the stator and I'm leaning towards the pickup coil. Tell me what you think.

The source coil spec should be between 270 - 330 ohms. I got 250. I'm guessing that 250 would still run because it is less resistance than spec. But I'm not positive.

I do know that my pickup coil is bad because I get 350 ohms and spec is 171 - 209.

So, will the ATV run with the source coil at 250 if I replace just the pickup coil? Or should I replace the entire stator?

Thanks.

 

im guessing this is a warrior, if its below spec then there done, i would get the whole stator, from RM or Rickys.