I have a 2003 yamaha Kodak with the sra and i am in the process on replacing the rear wheel bearings and seals in and i came across a problem with the seals. I bought an all ***** racing bearing kit for it, and everything was great, except the seals that go on the right side (the non brake side), there were 2 seals that were the same in the kit, which are not the same as what was on the wheeler and was wondering if there is some way they are soposeto fit or if the kit has the wrong seal for that side, because the bearings are all right, and the seal for the outer side (brake side) is right.