I have a 96 Blaster thats been sitting around for a few months because a bent crank.Well today I was checking the quad over, checked to see if it still has a spark and it doesn't, I looked over all the wiring, cleaned it all off where it connected, still nothing.What could be the problem?I have the oil injector blocked off, and the rear light taken off, what wires can I get rid of?Anyone know what might be the problem and how much its gonna cost to fix it.Thanks

 

I checked out your pictures and they dont work, an error comes up.
Are you 100% positive that there is no spark? Sometimes you cannot see it... This is what I do to check, if I cannot see the spark be the light/conditions or whatver just bite the nail and hold the end of the plug and kick it over, its a little nothing shock, you'll should be able to tell then.. wouldnt suggest doing it with any quad that has a battery, but Ive done it a couple times before with the blaster cuz I couldnt see ANY spark (think it was cuz of the sunlight) and Im still here... its like putting a 9volt battery on your toungue, but not that bad, make sure you kick it easy... good luck, "ZZZzzZZzzzzzzzttTT" lol!

 

I just tried touching the end of the plug and kicked it over, still no spark, i took apart the kill switch hoping to find something was wrong but nothing.Next step i guess is taking it to a shop hopefully it wont cost a lot to fix it, this *****!!!anyone know what the cost of a new CDI is?

 

See if this link works: http://www.photoloft.com/view/album....29962&a=502683
the pics are from the summer of 2000 they are the first 8, the other blasters belong to people from BlasterCentral.com

 

put a new spark plug in it and see