i have a 2007 350 griz it only idles if the choke is on a lil bit.does this sound like i got dirt in the idle jet

 

just put it full choke and let it idle until it dies.. like 2/3mins and then take the choke off completly and start it up and i should idle fine. let me know if this works for you.

 

thanks for the reponse, ill try that the next time i start it up.i put some seafoam in it ,maybe it will help

 

Your slow jet is pluged pull the carb and clean it with a small stiff wire you might get lucky with carb cleaner but usally they varnish up pretty bad. Just don't get the carb clear on any rubber gasket it will ruin them. And don't drill it out or guage the jet out use a wire from a wire brush to clean it out.

 

ditto on the PILOT jet, small wire, carb cleaner, compressed air