The Shee is sick...Please Help
#1
Well the idle was real low so i tried to ajust it but that didnt quit work as planned. I put the air screw and idle adj screw back to where they were origanily and now when it starts it runs for about 30 seconds and then bogs out. The air screw is set at about 1 oclock and the idles is about 2 oclock. Its either starving for air or fuel. So any help would be great.
#2
Start it. Let it shut down. Look at your plug. If it's wet, then you don't have enough air, if dry, not enough fuel.
I don't really get what you mean by 2 o'clock for the settings. Normally, I count the setting in turns, 1/2 turns, or even 1/4 turns for the idle screw. Haven't touched the pilot yet.
I don't really get what you mean by 2 o'clock for the settings. Normally, I count the setting in turns, 1/2 turns, or even 1/4 turns for the idle screw. Haven't touched the pilot yet.
#3
Peace of cake. You have some junk in the idle jet. Take the carbs off and get a real skinny straight slot screw driver. On the intake side/air filter side of the carb there is a little jet. Take it out and clean it. You might as well clean all your jets (main and mid range). Take off your floats and squirt the dickens out of everything. Put it back together and adjust the air needle. Screw it all the way in and about one full turn out. She will kick the first time and purr for an hour. Oh and punt the foam fitler.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



