2000 blaster won't start
#11
Parking brake ?
Not knowing exactly which incarnation your TORS system is,.... My system is "bypassed. The wiring is all left in place and the switch on the park brake is jumpered shut (the wires to the switch are tied together). this disables the system so that it doesn't anger the idle situation, and all works fine. With it "open" the thing won't rev without sputtering. It nearly dies while trying to rev with it left open. It's been years since I bypassed the system, so I may be totally backward on the open/closed circuit description....
I think the switch on your TORS is on the right hand lever. the park brake cam will have a small switch that is activated by it's movement.... find the switch, and see what it does. If it's "closed" or open with the park brake on.... then decide how to proceed to bypass/disable it.
I think the switch on your TORS is on the right hand lever. the park brake cam will have a small switch that is activated by it's movement.... find the switch, and see what it does. If it's "closed" or open with the park brake on.... then decide how to proceed to bypass/disable it.
#12
In your first post related to TORS, you said it wouldn't start with it connected, but starts first kick when disconnected.... Will it accelerate properly once disconnected or do you have a rev limiting issue as well? If it won't accelerate, then disconnect or bypass the brake lever switch as well as disconnecting the other stuff you have disconnected....
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)