Yamaha Timberwolf Idle/choke problems & Slipping Gear
Jan 13, 2025 | 11:46 AM
#11
Weekend Warrior
Joined: Jan 2025
Posts: 1
Likes: 0
yamaha timerwolf 250 running issues
After two days of cursing at it I found out what was wrong 
, Turns out the flywheel was not seating correctly letting the key to sheer, Also the carb was not set right and needed to be cleaned one again, Runs like a top now, Goes up hills like they are nothing in any gear, Lots of power 
Not sure why people say they are under powered. Only thing left is to mount a winch, Any ideas where?
, Turns out the flywheel was not seating correctly letting the key to sheer, Also the carb was not set right and needed to be cleaned one again, Runs like a top now, Goes up hills like they are nothing in any gear, Lots of power Not sure why people say they are under powered. Only thing left is to mount a winch, Any ideas where?what were the issues that needed addressed with carburetor? I also have a timberwolf 250 with similar issues and im not sure what to do. ive cleaned the carb multiple times, even swapped the carb, it still idles very rough if it idles at all and when you give it full throttle it stumbles and dies. any help would b greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)