Yamaha Discussions about Yamaha ATVs.

Warrior Jetting?

Thread Tools
 
Search this Thread
 
  #1  
Old 04-10-2001 | 12:38 PM
Warrior348's Avatar
Thread Starter
|
Trailblazer
Joined: Sep 2000
Posts: 40
Likes: 0
Default

Hey everyone,,,
I looked at my main jet and it had a # of 145...
I'm not sure if that's the stock # or not...
I have a performance pipe and I'm wondering what I should really have in it.
The reason I'm asking is because when I punch the throttle is seems to die out....
I raised the idle and that seemed to help a little
but it still could be better....
Please help..!!
 
  #2  
Old 04-10-2001 | 01:36 PM
mdegain's Avatar
Range Rover
Joined: Feb 2001
Posts: 160
Likes: 0
Default

Well, it could be a couple fo things with it dying out when you hit the gas, clogged jet, timing, or too small jet. 145 is the stock. Depending on the exhaust you have, a 146.5 should work. Make sure you clean it out really good too. I hope this helps
 
  #3  
Old 04-11-2001 | 11:18 AM
Warrior348's Avatar
Thread Starter
|
Trailblazer
Joined: Sep 2000
Posts: 40
Likes: 0
Default

Thanks for the reply....
I have an FMF pipe...(it's oval with plates) , can't remember what's it's called, it's like 2 years old.
I'll try the 146.5..and see what happens
 
  #4  
Old 04-11-2001 | 01:20 PM
TexasDS's Avatar
Trailblazer
Joined: Mar 2001
Posts: 34
Likes: 0
Default

I had a Warrior before I got my DS with a Big Gun complete system. I could not get the jetting even close with the stock carb. I bought a 36mm Mikuni round slide, and bolted it on...started right up and hauled a$$. I'm not sure what the jet was. I think a 150.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ReconBayou
Kawasaki
11
10-31-2022 06:37 PM
Barnsnelbon
Yamaha
1
09-27-2015 04:07 AM
Bernhard
Yamaha
1
09-25-2015 01:45 PM
XxS0ccerstarxX
Honda
4
09-24-2015 03:02 PM
XxS0ccerstarxX
Honda
2
09-22-2015 03:40 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 04:27 AM.